Composite Decking
Composite decking is a low-maintenance alternative to timber with a consistent look and long service life. Ideal for decks and outdoor areas where durability and reduced upkeep are a priority.
The height extension for NewTechWood Adjustable Decking Pedestal is great for lifting your deck even further from the ground.
Benefits of Decking Pedestal Height Extension
How do they work? Simply lock into place on top of your pre-installed decking pedestal.
Features of Deck Height Extensions
NewTechWood Coastal Grooved & Solid Edge Decking boards are a composite wood product. The Coastal Decking range requires no oiling, painting or regular sanding required.
Benefits of Composite Deck Boards
The grooved edge deck boards allow for a hidden installation system using t-clips. Use these deck boards for the outer edges of your deck where one edge will be visible.
Features of NewTechWood Decking
Building a composite deck? You should construct your deck frame with our Aluminium Deck Framing System.
Benefits of Aluminium Deck Framing System
Aluminum deck frames are built to outlast timber deck frames. They work well over waterproof membranes or for renovating tiled or concrete floors with minimal height increase.
Features of NewTechWood Deck Frames
Use these NewTechWood Adjustable joist Pedestals as the base for your Structural Deck Framing System.
Benefits of NewTechWood Adjustable Joist Pedestal
Features of Joist Pedestals
These composite screw covers are designed to fill in the screw holes on your composite decking boards to create a seamless, professional appearance.
Benefits of Deck Screw Covers
Make sure you line up the grain of your decking boards with the grain on the screw cap! These can be difficult to remove once installed.
Features of Screw Hole Plugs
The Klevaklip Snap-loc is a hidden fixing system that makes installing Modwood decking faster, cleaner and virtually foolproof. Simply clip the grooved boards into place with a slight push.
Benefits of Klevaklip Snap-loc Clips for Modwood Decking
- Enjoy a super fast install – up to three times faster than conventional systems
- Consistent 6mm gaps for a professional finish without the time spent perfecting it
- Non-corrosive nylon construction – safe for coastal, pool & high-humidity environments
- Strong in Aussie conditions with UV stabilised materials
- Versatile – works with timber & steel joists, fixed by screws, nails or nail gun
With no visible fasteners, the Snap-loc system gives your deck project a clean, professional finish in less than half the time it takes to install a traditional timber deck. Available in packs of x40.
The Modwood Deck Screw Depth Setter takes the guesswork out of driving decking screws to the right depth. Adjustable and easy to use, it ensures every screw sits perfectly flush with the board surface — protecting your deck finish and saving time across the whole installation.
Benefits of the Modwood Decking Smart-bit
- Set every screw at the target depth with the auto-stop mechanism
- Protect your deck surface from marks & damage with a free-spinning stop collar & rubber O-ring
- Versatile toolbox staple with a fully adjustable depth setting to suit different screws & boards
- Compatible with both Phillips & Torx bits for versatility across fastener types
The Modwood screw depth setter (smart-bit) is a simple addition to your kit that makes a noticeable difference to the finished result — particularly across large deck areas where consistency really counts.
10Gx65 Modwood Timber Decking Screws in 305 stainless steel are purpose-built for fixing Modwood composite decking boards to timber substructures.
Benefits of 10Gx65 Modwood Timber Screws
- Type 17 auger tip & tri-lobar shank for powerful penetration through dense materials
- Reduced cam-out during installation due to extra deep star drive recess
- Reverse thread prevents mushrooming on the board surface
- Versatile – can be used alongside Modwood hidden fixing systems
Engineered with the demanding properties of composite decking in mind, these screws are designed to drive cleanly, sit flush and hold firm. Available in matching colours to complement your Modwood composite deck and sold in packs of x100.
10Gx65 Modwood Timber Decking Screw 316SS is the go-to fastener for Modwood decking installations in coastal, poolside and other high-corrosion environments.
Benefits of 10Gx65 Modwood Timber Deck Screws
- Superior corrosion resistance with grade 316 stainless steel in salt air and poolside environments
- Clean, powerful drilling through composite boards with type 17 auger tip & tri-lobar shank
- Enjoy reduced cam-out during installation with an extra deep star drive recess
- Reverse thread to prevent mushrooming on the board surface
The 316SS is the recommended screw wherever salt air, pool chemicals or ongoing moisture exposure are part of the environment, giving you confidence the fasteners will last as long as the deck itself. Available in matching colours to complement your Modwood composite deck and sold in packs of x100.
Modwood Metal Deck Screws in 410 grade stainless steel are designed to securely attach Modwood decking to steel and aluminium substructures. With superior corrosion resistance thanks to the high grade stainless steel, zinc plated and epoxy coated body, it’s a reliable fastener for metal-framed decks that will stand the test of time.
Benefits of Modwood Metal Deck Screws
- Premium strength corrosion resistance with 410SS construction, zinc plating & epoxy coating
- Enjoy increased drilling speed & reduced mushrooming with the flared wings
- Drives cleanly through steel & aluminium substructures without pre-drilling
- Available in the classic Modwood colour range in packs of x100
Use these alongside the Modwood hidden fixing system for a secure and long-lasting composite deck.
Our 137×23 Modwood Composite Decking brings a premium look to any outdoor space without the upkeep of traditional timber. It’s a durable, eco-conscious choice that’s built in Australia, for Australian conditions.
Benefits of Modwood Composite Decking
- Low maintenance with no sanding, sealing or painting required
- Choose sustainable decking – made from up to 90% recycled or reclaimed materials
- Splinter-free surface safe for kids and bare feet
- Backed by a 10 year warranty for long-term peace of mind on residential projects
ModWood is the original manufacturer of composite decking in Australia and leads the way in quality and innovation. To this day, ModWood is designed and manufactered right here in Australia.
The 88×23 Modwood Composite Decking is a sleek, narrower-profile board that delivers the same premium composite quality in a size that suits tighter layouts and more detailed deck designs. No timber upkeep, no compromise on looks.
Benefits of 88×23 Modwood Composite Decking
- Save time on maintenance – no sanding, sealing or painting
- Build sustainably – made from up to 90% recycled/reclaimed materials
- Splinter-free finish that’s safe underfoot for the whole family
- Backed by a 10 year residential warranty
As the original composite decking manufacturer in Australia, Modwood has a long track record of performing in the country’s toughest conditions and continuing to raise the bar on quality and innovation.
The Modwood Flame Shield range is composite decking built for bushfire-prone areas. Certified for use in BAL-12.5 through to BAL-40 zones, with the natural timber look and low maintenance you’d expect from Modwood.
Benefits of Modwood Flame Shield Composite Decking
- Certified to AS 3959-2018 for BAL-12.5 to BAL-40 rated areas
- Specially formulated with a fire-retardent in the design
- R11 slip resistance rating to AS 4586:2013
- Made from up to 90% recycled or reclaimed materials
With multiple colour options and enclosed or un-enclosed substructure installation capability, Flame Shield® allows you greater freedom and choice when it comes to designing your outdoor space. When installing in BAL rated areas, it’s recommended to use steel framing on the deck substructure.
Most composite decking is made overseas, designed for climates nothing like ours. ModWood has been manufacturing in Australia since 2001, built specifically for Australian conditions.
137×23 Modwood Xtreme Guard Solid board is the finishing piece that completes a deck built to last. Sharing the same four-face capping technology as the grooved Xtreme Guard range, the solid profile is designed for deck edges and borders — giving your project a polished, consistent look from every angle.
Benefits of Xtreme Guard Solid Decking
- Fully capped boards are protected against moisture, stains, UV & fading
- P5 slip resistance to AS 4586:2013 — the highest achievable rating
- Spend no time on maintenace! No sanding, oiling or sealing required
- Build sustainably – made from up to 90% recycled or reclaimed materials
Available in 5 colours with a deep embossed grain to match seamlessly with the grooved Xtreme Guard decking boards.
Unlike most composite decking brands that are imported from countries with completely different climates, ModWood is Australian-owned and has been making their product here since 2001, with our harsh Aussie climate in mind.
137×23 Modwood Xtreme Guard Grooved boards take composite decking to the next level with full four-face capping for superior protection against moisture, stains and fading.
Benefits of 137×23 Modwood Xtreme Guard Decking
- P5 slip resistance rating — the highest achievable level to AS 4586:2013
- UV stabilisers lock in colour & protect against sun damage
- Zero sanding, oiling or sealing — just wash down when needed
- Build eco-friendly – made from up to 90% recycled or reclaimed materials
Five multi-chromatic colours with a deep embossed grain give it a genuinely timber-like finish that holds up beautifully over time. Available in lengths of 5.4m.
Most composite decking is designed for overseas climates that look nothing like ours. ModWood is Australian-owned and has been manufacturing here since 2001 with decking built for our harsh conditions front of mind.
137×32 Modwood Marina is our toughest composite decking board, engineered for commercial and high-traffic applications where standard boards just won’t cut it. From marinas and jetties to boardwalks and park furniture, it’s built to handle whatever Australian conditions throw at it.
Benefits of 137×32 Modwood Marina Composite Decking
- Highly resistant to damage from salt air, UV, rot & moisture
- Eco-friendly – made from recycled materials & won’t leach into the environment
- Sturdy & slip-resistant! R11 anti-slip rating suited to wet environments
- Low maintenance – no oiling, painting or sealing required
- GreenRate Level C certified by Global GreenTag™
In a world where most composite decking is imported from countries with a different climate to our harsh conditions, ModWood is an Australian-owned company, manufacturing in Australia since 2001 – for Australian conditions.
These NewTechWood Terrace Solid Edge Fascia Decking boards are a composite fascia board. They allow you to achieve a natural wood-grain appearance without the maintenance of timber.
Benefits of Composite Fascia Boards
NewTechWood fascia boards are best used along the side of the deck, to cover the structure. Use the solid edge deck board where both edges of the board will be visible.
Features of NewTechWood Terrace
NewTechWood Terrace Grooved Edge Decking allows you to achieve a natural wood-grain appearance without the maintenance of timber.
Benefits of Composite Decking
Grooved edge deck boards require a specific installation system – as we don’t recommend screwing or nailing directly through the board. Instead, you should use T-Clips. These ‘grooved edge’ boards make up the bulk of your deck (any boards where the edge butts up against another board).
Features of NewTechWood Decking
In our range of composite decking, NewTechWood Terrace Grooved & Solid Edge Decking allows you to achieve a natural wood-grain appearance without the maintenance of timber.
Benefits of Composite Decking
NewTechWood grooved edge deck boards require a specific installation system. Use these deck boards for the outer edges of your deck where one edge will be visible, and the other connects to another deck board.
Features of NewTechWood
Elevate your composite deck with these NewTechWood T-Clip & Screw 5.5mm, designed exclusively for NewTechWood composite wood decking.
Benefits of Composite Decking Clips
Whilst they feature a self-drilling tip, we recommend using a countersinking tool to pre-drill before installing. Once installed, these decking clips remain hidden from view, creating a neat and uniform deck design.
Features of NewTechWood T-Clips
Designed to provide your NewTechWood Composite Deck Boards with a zero-screw visual, these composite decking clips are durable and resistant to corrosion.
Benefits of NewTechWood Decking Starter Clip & Screw
These starter clips are to be used when installing the first composite decking board at the edge of a deck. We recommend using 1 start clip per joist.
Features of Composite Decking Starter Clips
Designed to provide your NewTechWood Composite Deck Boards with a zero-screw visual, these composite decking clips are durable and recommended to use when installing the first decking board when it is not flush against a wall.
Benefits of NewTechWood Decking Starter / End Clip & Screw
These starter clips are to be used when installing the first composite decking board at the edge of a deck. We recommend using 1 start clip per joist.
Features of Composite Decking Starter Clips
NewTechWood Decking Mini Gap Locking Clips provide a 1.5mm gap between your composite decking boards and deter the boards from movement during natural expansion and contraction.
Benefits of Locking Mini Gap Clips
The Locking Mini Gap Clip system is perfect for commercial installations where public safety may be a consideration, as well as residential decks in dense greenery areas. A smaller gap is great for leafy areas as it prevents leaves and seeds getting caught in the decking board gap.
Features of NewTechWood Deck Clips
What is the difference between regular NewTechWood mini gap clips and mini gap locking clips?
Whilst the regular clips lock between the boards securely, they still allow the decking to breathe (expand & contract) so that it doesn’t warp, distort, or buckle from these movements. The locking clips feature ‘teeth’ that grab onto the boards and control the direction in which the board expansion takes place.
NewTechWood Decking Mini Gap Clips provide a 1.5mm gap between your composite decking boards – allowing you to enjoy a near-seamless deck appearance.
Benefits of Mini Gap Clips
The Mini Gap Clip system is perfect for commercial installations where public safety may be a consideration. A smaller gap is great for leafy areas as it prevents leaves and seeds getting caught in the decking board gap.
Features of NewTechWood Deck Clips
What is the difference between regular NewTechWood mini gap clips and mini gap locking clips?
Whilst the regular clips lock between the boards securely, they still allow the decking to breathe (expand & contract) so that it doesn’t warp, distort, or buckle from these movements. The locking clips feature ‘teeth’ that grab onto the boards and control the direction in which the board expansion takes place.
