137×23 Modwood Flame Shield Composite Decking
From Price range: $158.13 through $162.43 each, Inc. GST
The Modwood Flame Shield range is composite decking built for bushfire-prone areas. Certified for use in BAL-12.5 through to BAL-40 zones, with the natural timber look and low maintenance you’d expect from Modwood.
Benefits of Modwood Flame Shield Composite Decking
- Certified to AS 3959-2018 for BAL-12.5 to BAL-40 rated areas
- Specially formulated with a fire-retardent in the design
- R11 slip resistance rating to AS 4586:2013
- Made from up to 90% recycled or reclaimed materials
With multiple colour options and enclosed or un-enclosed substructure installation capability, Flame Shield® allows you greater freedom and choice when it comes to designing your outdoor space. When installing in BAL rated areas, it’s recommended to use steel framing on the deck substructure.
Most composite decking is made overseas, designed for climates nothing like ours. ModWood has been manufacturing in Australia since 2001, built specifically for Australian conditions.
Related Products
For homeowners in bushfire-prone areas, decking choices have historically been limited and often uninspiring. The Modwood Flame Shield range changes that. Specially formulated with a fire retardant additive and tested to AS 3959-2018, it’s certified for use across BAL-12.5, BAL-19, BAL-29 and BAL-40 bushfire attack level zones.
Key Features of Modwood Flame Shield Decking
- Tested and certified to AS 3959-2018 across BAL-12.5 to BAL-40
- Protection against ember attack and burning debris from wind-borne embers
- Deep embossed surface with R11 slip resistance to AS 4586:2013
- Compatible with both enclosed and unenclosed substructures
- Australian-made from up to 90% recycled and reclaimed materials
Why choose Modwood Flame Shield?
If your property sits in a designated bushfire attack level zone, your decking choice needs to meet the requirements set out under AS 3959-2018. Flame Shield is one of very few decking products on the market that can do that while still delivering the warmth and texture of a natural timber finish. The R11 slip rating makes it practical for outdoor walkways and patios, and the composite construction means it won’t demand the ongoing maintenance that traditional timber would.
As a part of the Flame Shield ModWood decking range – these boards are not fully capped and may weather over time due to the wood content inside the boards. This means that similarly to timber decking, the boards could grey over a long time span (many years). For a fully capped composite board that won’t fade – choose the Xtreme Guard Modwood Decking.
To learn more about installation requirements, view the Modwood installation guide.
What makes Flame Shield different from standard Modwood decking?
Flame Shield is a specially formulated composite board with a fire retardant additive included. It's designed for use in bushfire-prone areas where standard decking products may not be compliant, or BAL rated building products are required.
What BAL ratings is Modwood Flame Shield certified for?
Flame Shield can be used in BAL-12.5, BAL-19, BAL-29 and BAL-40 rated areas.
Can I install it with an enclosed subframe?
Yes. Flame Shield can be installed with either an enclosed or unenclosed substructure, giving flexibility depending on your site and design requirements.
Does Flame Shield have an anti-slip surface?
Yes. Flame Shield features a deep embossed pattern on the board surface with an R11 slip resistane.
What length does this board come in?
The Modwood Flame Shield composite decking is only available in 5.4m lengths. You can cut these to your preffered size
Are these boards still low maintenance like standard Modwood?
Yes. No oiling, staining or sealing required. A periodic sweep and wash-down is all that's needed.
How is Modwood Flame Shield fire resistant?
A fire retardant additive is incorporated into the board composition during manufacturing. It's not a surface coating, so it won't wear off over time.
What fixing system can I use?
The Modwood coloured head screws are suitable, consistent with other Modwood products. Non compliance of fixing instructions will void warranty.
Delivery
Your order is prepared by our team and delivered once everything is checked and packed. You’ll receive updates along the way, so you know exactly when it’s on the move.
What you can expect:
- Next business day delivery on stocked lines when you order before 2pm*
- Delivery costs calculated at checkout
- Tracking updates right through to your driveway
- No minimum order required for delivery
Click & Collect
Collect your order as early as the next business day. Once your order is ready, we’ll send you an SMS to confirm it’s available for collection. Please wait for this message before coming to site.
Good to know:
- Next business day collection is available on most in-stock items*
- Bring a suitable vehicle and the equipment needed to secure your load
- For safety reasons, our team can’t assist with tying down or load securing
- Need to delay collection? Just let us know
You May Be Interested In
Merbau Decking Ripple Pre-Oiled
From Price range: $6.01 through $9.89 each, Inc. GST
Forest Red Iron-Gum Decking S&B
From Price range: $7.99 through $16.28 each, Inc. GST
90×22 Pine Decking Ripple WBA
From Price range: $11.14 through $27.85 each, Inc. GST
Radiata Pine Decking
From $58.05 each, Inc. GST
QLD Mixed Hardwood Feature Decking Packs
From $2,176.80 each, Inc. GST
137×32 Modwood Marina Composite Decking
From Price range: $147.91 through $150.13 each, Inc. GST
NewTechWood Avenue Grooved & Solid Edge Decking
From $104.52 each, Inc. GST
Reviews
Clear filtersThere are no reviews yet.